https://sciex.com/content/SCIEX/na/us/en

AB Sciex is doing business as SCIEX. © 2010-2018 AB Sciex. The trademarks mentioned herein are the property of the AB Sciex Pte. Ltd. or their respective owners. AB SCIEX™ is being used under license. Beckman Coulter® is being used under license. Product(s) may not be available in all countries. For information on availability, please contact your local representative. For research use only. Not for use in diagnostic procedures.

Author

amornmart jaratrungtawee

Member Resolved

Tags

cable | checked | close | computer | connection | contact closure | couple | current | direction | engineer | issue | item | link | machine | member_question | open | regard | run | similar | software | solve | work
May 17, 2023
Loss the contact closure signal

Our 7600 couple with nanoLC Ultimate 3000 via contact closure. it has run without any loss connection during the batch. Just yesterday, the last injection keep equilibrating system until the LC finished the gradient run. We closed the software and power off LC and MS then started again but it did not help. The Dionex engineer also checked their LC and triggering cable found both are ok.

 

Anyboby has the similar issue as us and how do you solve it?

 

 

 

Best Regards,

Joy

Reply to question

0 Comments

Submit a Comment

SCIEX Now™ Support Network

The Destination for All Your Support Needs

The SCIEX clinical diagnostic portfolio is For In Vitro Diagnostic Use. Rx Only. Product(s) not available in all countries. For information on availability, please contact your local sales representative or refer to www.sciex.com/diagnostics. All other products are For Research Use Only. Not for use in Diagnostic Procedures. Trademarks and/or registered trademarks mentioned herein, including associated logos, are the property of AB Sciex Pte. Ltd. or their respective owners in the United States and/or certain other countries (see www.sciex.com/trademarks).

Echo and Echo MS are trademarks or registered trademarks of Labcyte, Inc. in the United States and other countries, and are being used under license.
Empower is a trademark of Waters Corporation used under license. © DH Tech. Dev. Pte. Ltd.

Wordpress Social Share Plugin powered by Ultimatelysocial